So the next little project is to get some brake adaptors made as i cant just buy them off the shelf 🙁

I have Wilwood dynalite 4 pods going on with 280mm vented Volovo front discs.

So i have started making up the adaptors, first from an old chopping board! as its easy to cut, then the next step is to make one from ally sheet to test and then get some proper ones cut from that and after that would out the spacing to get the calipers sitting out far enough, then get those turned and welded on.

So here we are with the first fitting. Im now just making the ally version.

IMG_20160603_153517 IMG_20160603_153451 IMG_20160603_153458