So its been a while since i did an update as life has been a little hectic with work! But it time to start on the exhaust build. I have had the parts sitting around for ages and the plan is to set the system up with the flanges, hangers etc.. just tacked in place and then get them welded on by someone who can actually weld 🙂

So the first part is to start with the tail pipe , which is a nice straight through pipe with a carbon outer with the hope that it wont get too hot as the old one got a little warm! and its re-packable if needed. Once i have this fitted up and hanging on the car in place i can then sort out the over the axel pipe whick i have had hand bent in one piece, so its just getting the positioning right so it lines up with the back box and the big over center box that i have.

Not the best picture but more to come!!

Fitting the stainless steel exhaust system to the Opel Manta A Series